By use up novel catalyst the pyrolysis of mixed plastics has been reflected as an effective approach to convert waste plastics into environmental responsive and industrially valuable hydrocarbon gas and liquid products. Catalytic degradation is a hopeful alternative for municipal plastic wastes recycling. Further than 97% of a polymer mixed converted into ignitable hydrocarbon in a catalytic cracking reaction. The products are mostly middle distillates. In this study equally weighted mixed HDPE (high density polyethylene), LDPE (low density polyethylene), PP (polypropylene), PS (polystyrene), PVC (polyvinyl chloride), PET (polyethylene terephthalate were degraded. The reaction occurred in a semi batch reactor at several temperatures and catalyst/polymer ratios in this investigation, in order that obtain an optimum operating condition. The products are liquid and gaseous hydrocarbons with negligible of residue. The liquid and gas products were in the sort of middle distillate cuts of gasoline and diesel. Finally, with a metal base catalyst, yielded 97% of given mixed to costly middle distillate products that include 84% liquid hydrocarbon (C5-C10) and 13% gas (C1– C4) with less percent of residue. The optimum condition for this yield reports at a temperature of 450 ºC and 50% of catalyst w/w at atmosphere pressure.
Key words: Environment, degradation, fuel, mixed plastics, catalyst.
- W.S. Donahue, J.C. Brandt, “Pyrolysis: Types, Processes, and Industrial Sources and Products”, Nova Science Pub Inc, 2009.
- J. Scheirs, W. Kaminsky, “Feedstock recycling and pyrolysis of waste plastics: converting waste plastics into diesel and other fuels”, J. Wiley & Sons, 2006.
- Lopez, I. de Marco, B.M. Caballero, M.F. Laresgoiti, A. Adrados, A. Torres, “Pyrolysis of municipal plastic wastes II: Influence of raw material composition under catalytic conditions”, Waste Manag, 31, 1973-83, 2011.
- G.M. Zeng, X.Z. Yuan, Y.Y. Yin, T.J. Hu, G. Yan, “Manufacture of liquid fuel by catalytic cracking waste plastics in a fluidized bed”, Energy Sources, 25(6), 577–90, 2003.
- G. Anders, I. Burkhardt, U. Illgen, I.W. Schultz, J. Scheve, “The influence of HZSM-5 zeolite on the product composition aftercracking of high boiling hydrocarbon Fractions”, Applied Catalysis A General, 62(1), 271–8, 1990.
- Demirbas, “Pyrolysis of municipal plastic waste for recovery of gasoline range hydrocarbons”, Journal of Analytical and Applied Pyrolysis, 72, 97–102, 2004.
- M.D. Hernandez, A.N. Garcia, A. Marcilla, “Study of the gases obtained in thermal and catalytic flash pyrolysis of HDPE in a fluidized bed reactor”, Journal of Analytical and Applied Pyrolysis, 73(2), 314–22, 2005.
- N. Miskolczi, L. Bartha, G. Deak, B. Jo ver, D. Kallo, “Thermal and thermo-catalytic degradation of high-density polyethylene waste”, Journal of Analytical and Applied Pyrolysis, 72(2), 235–42, 2004.
- Y.H. Lin, M.H. Yang, “Catalytic reactions of post-consumer polymer waste over fluidised cracking catalysts for producing hydrocarbons”, Journal of Molecular Catalysis A Chemical, 231(1–2), 113–22, 2005.
- L.L. Wall, S.L. Madorsky, D.W. Brown, S. Straus, “The depolymerization of polymethylene and polyethylene”, Journal of the American Chemical Society, 76, 343–7, 1957.Int. J Sci. Emerging Tech Vol-5 No 3 March 2013263
- Y. Sakata, M.A. Uddin, A. Muto, “Degradation of polyethylene and polypropylene into fuel oil by using solid acid and non-acid catalysts”, Journal of Analytical and Applied Pyrolysis, 51(1–2), 135–55, 1995.
- H. Ohkita, R. Nishiyama, Y. Tochihara, T. Mizushima, N. Kakuta, Y. Morioka, “Acid properties of silica-alumina catalysts and catalytic degradation of polyethylene”, Industrial & Engineering Chemistry Research, 32(12), 3112–6, 1993.
- W.B. Ding, J. Liang, L.L. Anderson, “Thermal and catalytic degradation of high density polyethylene and commingled post-consumer plastic waste”, Fuel Processing Technology, 51(1–2), 47–62, 1997.
- K. Murata, K. Sato, Y. Sakata, “Effect of pressure on thermal degradation of polyethylene”, Journal of Analytical and Applied Pyrolysis, 71(2), 569–89, 2004.
- P.K. Ramdoss, A.R. Tarrer, “High-temperature liquefaction of waste plastics”, Fuel, 7, 293-299, 1998.
- Z. Feng, J. Zhao, J. Rockwell, D. Bailey, G. Huffman, “Direct liquefaction of waste plastics and coliquefaction of coal-plastic mixtures”, Fuel Processing Technology, 49, 17-30, 1996.
- Buekens, H. Huang,“Catalytic plastics cracking for recovery of gasoline-range hydrocarbons from municipal plastic wastes”, Resources conservation and recycling, 23, 163-181, 1998.
- F. Pinto, P. Costa, I. Gulyurtlu, I. Cabrita, “Pyrolysis of plastic wastes: 2. Effect of catalyst on product yield”, Journal of Analytical and Applied Pyrolysis, 51, 57-71, 1999.
- J.S. Kim, W.Y. Lee, S.B. Lee, S.B. Kim, M.J. Choi, “Degradation of polystyrene waste over base promoted Fe catalysts”, Catalysis Today, 87,59-68, 2003.
- F.J. Mastral, E. Esperanza, C. Berrueco, M. Juste, J. Ceamanos, “Fluidized bed thermal degradation products of HDPE in an inert atmosphere and in air–nitrogen mixtures”, Journal of Analytical and Applied Pyrolysis, 70, 1-17, 2003.
- Garforth, Y.H. Lin, P. Sharratt, J. Dwyer, “Production of hydrocarbons by catalytic degradation of high density polyethylene in a laboratory fluidised-bed reactor”, Applied Catalysis A: General, 169, 331-342, 1998.
- S. Ali, A. Garforth, D. Harris, D.Rawlence, Y. Uemichi, “Polymer waste recycling over used catalysts”, Catalysis Today, 75, 247-255, 2002.